It is not something you should do lightly. Your employees could be put at risk by using a difficult access staircase or catwalk up to the roof access. This could not only make it unsafe but also make compliance difficult. This could result not only in more expensive repairs but also penalties.
Sometimes, there’s a lot of unattractive equipment on the rooftops of commercial, and industrial buildings. It can be tempting to assume that because this equipment is high up on the roof, no one will see them. But they can.
Unsightly equipment and features can make your company look less professional, whether they are viewed from afar or from adjacent buildings. Ugly rooftop equipment can negatively affect your brand identity, particularly if it is near competitors.
You should be aware of the exterior appearance of your building and how it presents to customers, prospects, partners, and other potential customers.
While electrical, heating, and ventilation equipment is a part of every building, they don’t have to remain visible for everyone to see. A variety of roof-based equipment can be hidden behind attractive rooftop screens.
It is important to do it right first and build a trusting system. These are six ways to make sure your roof access is secure and compliant.
Evaluate Variables
It is essential to establish how the access route is going to be used. Which frequency will it be used How many people will it be used? It must be able to support large loads and people. Can you see your roof from the ground or is it hidden? Will the walkway be able to follow if you can? How far can the walkway be extended? How often are you going to support the grating Are gates going to be needed?
These are the details required to proceed to the next stage.
Be Sure To Use The Correct Materials
Different access requirements can be met with a variety of materials. Some grates can handle heavy loads and lighter ones. It is essential to choose the best material for your application.
You can only have safe access if you choose the right profile.
Use The Most Suitable Profile.
Slip resistance is important when working in environments that can be affected by the elements. This is why you would use a serrated grating. Sometimes you might need to protect small parts. If this is the case, you might consider a profile with fewer corners.
Ensure Efficient Draining
Slick surfaces and rust can be caused by the accumulation of water in a swimming pool. Safety and job-specific issues will be faced by employees working at height. Another factor is what they don’t want. Your workplace will be cleaner and safer if you have a properly designed drainage system.
Weather can be a cruel and unpredictable force. Rooftop access should not be blocked by slippery steps and pooled waters.
Do Not Disturb The Roof
Roof access walkways are essential for safety while working at height. It is important that the roof engineering stays intact. It was intended to perform a task. Access stairs, walkways, railings should not compromise the structural integrity.
Partner With A Supplier That Is Knowledgeable About What They Do
You need to ensure that your supplier is knowledgeable about your industry. Con-form Group Shop has a long track record of providing access products. This includes water treatment plants and oil drilling platforms. There are many options for profiles and materials. When you work with trusted suppliers, you can feel confident that your business is safe and sound.